Bridge Launching, Marco Rosignoli, Thomas Telford, First Published 2002 Contents

Bridge Launching, Marco Rosignoli, Thomas Telford, First Published 2002

This file is password

Password: CE-MS MS.c Bijan Mohammadi

All text & change the color to use to download it

    دانلود /Download                   کلمه عبور/Password

Contents

Chapter1. Introduction

Chapter2. Incremental launching of bridges

Chapter3. PC bridges

Chapter4. Composite bridges

Chapter5. Prestressed composite bridges

Bridge design and Evaluation LRFD and LRFR,Gongkang Fu,Wiley,2013

این کتاب دارای 438 صفحه می باشد در زمینه طراحی برزگراه و تقاطع  پل ها طبق آیین نامه  AASHTO می باشد وضریب ها اعمال شده و دارای مسئله کاربردی برای سازه پل می باشد.اولین چاپ این کتاب در سال 2003 چاپ شدبه عنوان کتابچه راهنما

This Book  Bridge design and Evaluation LRFD and LRFR by Gongkang Fu,Wiley 2013

This file is Password

Password: CE-MS MS.c Bijan Mohammadi

All Text and change the color to use to download it

کلمه عبور/Password                                       دانلود/Download                                

یک از ویژگی این کتاب می تواند از برای طراحی اسکله (Jetties) هم استفاده شود قسمت تکیه های عرشه و پایه پل

ضربه گیرهای زیر سری پل (نئوپرن) و انواع درز انبساط

نیروهای مکانیکی شامل بارهای افقی، عمودی و گشتاورهای وارده بر یک پل در ترکیب با تنشهای ناشی از انقباض و انبساط مصالح پل و خزش آنها موجب تغییر شکل در این سازه ها می شود.لذا برای کنترل این حرکات از ضربه گیرهای زیر سری پل (بالشتکهای نئوپرنی) استفاده می شود.

به زودی از همین وبلاگ فیلمی درباره آن ارایه می شود.این ضربه گیرها تلفیقی از فلز و لاستیک بوده و قطعات نگهدارنده ای هستند که در پلهای راه آهن،پلهای بتنی، پایه ساختمانها،فرودگاهها و سدها، اسکله ها  که در معرض امواج بلند و خروشان قرار دارند استفاده می شوند. طراحی و تولید انواع ضربه گیرهای زیر سری پل بر اساس استانداردهای خاص و متناسب با میزان تحمل بار عمودی و افقی آنها و میزان جابجایی مجاز صورت می پذیرد.

یک زمانی به همین ضربه گیرهای پروژه های پل توی ایران به تاخیر خودن

Elastomeric Bearing & Expansion Joint

Bridge bearings are devices for transferring loads and movements from the deck to the substructure and foundations.The elastomeric bearing allows the deck to translate and rotate,,but also resists loads in the longitudinal,transverse and vertical directions. Loads are developed, and movement is accommodated by distorting the elastonmeric pad

Bearings are arranged to allow the deck to expand and contract ,but retain the deck in its correct position on the substructure

,

کتاب مورد نظر با این عناوین می باشد./Book with this title

Chapter1 Introduction

Bridge Engineering and Highway Bridge Network

Types of Highway Bridges

Bridge Construction and Its Relation to Design

AASHTO Specifications and Design and Evaluation Methods

Goals for Bridge Design and Evaluation

Preliminary Design versus Detailed Design

Organization of This Book

References

Chapter 2 Requirements for Bridge Design and Evaluation

General Requirements

Limit States

Constructability

Safety

Serviceability

Inspect ability

Economy

Aesthetics

Summary

References

Problems

Loads, Load Effects, and Load Combinations

Chapter 3 Loads, Load Effects, and Load Combinations

Introduction

Permanent Loads

Transient Loads

Load Combinations

References

Problems

Chapter 4 Superstructure Design

Introduction

Highway Bridge Superstructure Systems

Primary Components of Highway Bridge Superstructure

Deck Systems

Deck-Supporting Systems

Design of Reinforced Concrete Deck Slabs

Design of Steel I Beams

Design of Prestressed Concrete I Beams

References

Problems

Chapter 5 Bearing Design

Introduction

Types of Bridge Bearing

Appropriate Selection of Bearings

Design of Elastomeric Bearings

References

Problems

Chapter 6 Substructure Design

Introduction

Piers

Abutments

Foundations

Design of Piers

Design of Abutments

References

Problems

Chapter 7 Highway Bridge Evaluation

Introduction

Inspection and Condition Rating

Load Rating

Fatigue Evaluation for Steel Components

References

Problems

 

-Bridge Engineering Handbook second edition,Substructure design,wai-fah chen,CRC Press,2014

نویسنده این کتاب مقالات زیادی درباره  سازه ، پل ها نوشته کتاب هندبوک مهندسی پل در 5 قسمت دیگر در باره طراحی ها پل و فونداسیون ....هم موجود است. دارای 378 صحفه می باشد.

This is book  Bridge Engineering Handbook second edition,Substructure design,wai-fah chen,CRC Press,2014

This file is password 

Password :CE-MS MS.c Bijan Mohammadi 

All Text and change the color to use to download it

دانلود/ Download                                       کلمه عبور/Password                            

This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been made to publish reliable data and information, but the author and publisher cannot assume responsibility for the validity of all materials or the consequences of their use. The authors and publishers have attempted to trace the copyright holders of all material reproduced in this publication and apologize to copyright holders if permission to publish in this form has not been obtained. If any copyright material has not been acknowledged please write and let us know so we may rectify in any future reprint

Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, microfilming, and recording, or in any information storage or retrieval system, without written permission from the publishers

        

Bearings

Piers and Columns

Towers

Vessel Collision Design of Bridges

Bridge Scour Design and Protection

Abutments

Ground Investigation

Shallow Foundations

Deep Foundations

Earth Retaining Structures

Landslide Risk Assessment and Mitigation