دنیای مهندسی سازه های دریایی
دنیای مهندسی سازه های دریایی

دنیای مهندسی سازه های دریایی

Offshore Structures

Frontiers in Offshore Geotechnics II,Susan Gourvenec and David White,CRC Press,2010

این کتاب درباره سرحدهای ژئوتکنیک فراساحلی می باشد، که دارای 939 صفحه است مجموعه ای از مقالات ارسالی به دانشگاه غربی استرالیا می باشد که توسط نویسندگان جمع آوری شده است. با این عناوین

Frontiers in Offshore Geotechnics II,Susan Gourvenec and David White,CRC Press,2010
The titles

This file is password

Password: CE-MS MS.c Bijan Mohammadi

All text and change the color to use to download it

                                                                                                     دانلود /  Download            کلمه عبور/Password                 

1 Keynotes

A systematic approach to offshore engineering for multiple-project developments in geohazardous areas

Recommended best practice for geotechnical site characterisation of cohesive offshore sediments

Gulf of Guinea deepwater sediments: Geotechnical properties, design issues and installation experiences

Geotechnics for subsea pipelines

Axial and lateral pile design in carbonate soils

New frontiers for centrifuge modelling in offshore geotechnics

Risk and reliability on the frontier of offshore geotechnics

2 Geohazards and gas hydrates

Neotectonic deformation of northwestern Australia: Implications for oil and gas development

Deepwater Angola part I: Geohazard mitigation

Deepwater Angola part II: Geotechnical challenges

Shallow gas hazard linked to worldwide delta environments

Analysis of submarine flow slides in fine silty sand

Hydrate dissociation around oil exploration infrastructure

An investigation of past mass movement events in the West Nile Delta

Deformation of seabed due to exploitation of methane hydrate reservoir

3 In situ site characterisation and pore pressure measurement

A site investigation strategy to obtain fast-track shear strength design parameters in deep water soils

Enhancement of the ball penetrometer test with pore pressure measurements

Laboratory free falling penetrometer test into clay

Offshore sediment overpressures: Overview of mechanisms, measurement and modeling

Angolan deep water soil conditions: GIS technology development for sediment characterization

Strength measurement in very soft upper seabed sediments

CPT in polar snow – preliminary observations

Parametric study of a free-falling penetrometer in clay-like soils

The future of deep water site investigation: Seabed drilling technology?

Mini T-bar testing at shallow penetration

Piezometer installation in deep water Norwegian Sea

Luva deep water site investigation programme and findings

Investigations into novel shallow penetrometers for fine-grained soils

Seabed drilling vs surface drilling – a comparison

4 Soil characterisation and modelling

Rheological behaviour of soft clays

A three-dimensional finite element study of the direct simple shear test

Repeated loading and unloading of the seabed

A new interpretation of the simple shear test

Physical modelling of the crushing behaviour of granular materials

New evidence for the origin and behaviour of deep ocean ‘crusts’

Soil unit weight estimated from CPTu in offshore soils

Strain rate dependent simple shear behaviour of deep water sediments in offshore Angola

Simplified calibration procedure for a high-cycle accumulation model based on cyclic triaxial tests on 22 sands

Understanding cyclic loading behavior of soil for offshore applications

5 Shallow foundations

Observations of shallow skirted foundations under transient and sustained uplift

Numerical study of grillage foundations on sand under combined VHM loading

The vertical bearing capacity of grillage foundations in sand

Behaviour of skirted footings on sand overlying clay

Numerical study of piping limits for suction installation of offshore skirted foundations and anchors in layered sand

Shallow foundation performance in a calcareous sand

A numerical study of the vertical bearing capacity of skirted foundations

The effect of torsion on the sliding resistance of rectangular foundations

Foundation design challenges of the MCR-A skirted gravity platform

Constructing breakwater with prefabricated caissons on soft clay

6 Piled foundations

Simplified analysis of laterally loaded pile groups

Behavior of piles under combined lateral and axial loading

Investigations on the behavior of large diameter piles under cyclic lateral loading

BP Clair phase 1 – Pile driveability and capacity in extremely hard till

Photoelastic investigation into plugging of open ended piles

Soil-pile interaction during extrusion of an initially deformed pile

BP Clair phase 1 – Geotechnical assurance of driven piled foundations in extremely hard till

Pile driving experiences in Persian Gulf calcareous sands

FLAC3D analysis on soil moving through piles

Cyclic loading of barrettes in soft calcareous rock using Osterberg cells

Shaft capacity of drilled and grouted piles in calcareous sandstone

Numerical analysis of mudmat contribution to capacity of piled offshore platforms

Simplified numerical model for analysis of offshore piles under cyclic lateral loading

Centrifuge modelling of rapid load tests with piles in silt and sand

Field measurements on monopile Dolphins

Behaviour of driven tubular steel piles in calcarenite for a marine jetty in Fujairah, United Arab Emirates

CPT-Based design method for axial capacity of offshore piles in clays

7 Foundations for renewable energy

Evaluation of pile capacity approaches with respect to piles for wind energy foundations in the North Sea

Installation of suction caissons for offshore renewable energy structures

Lateral behaviour of large diameter monopiles at Sheringham Shoal Wind Farm

Centrifuge modelling of offshore monopile foundation

Gravity based foundations for the Rødsand 2 offshore wind farm, Denmark

Geotechnics for developing offshore renewable energy in the US

Engineering issues for fixed offshore wind turbines on Lake Michigan Mid Lake Plateau, USA

Centrifuge model tests on piled footings in clay for offshore wind turbines

Design of monopile foundations in sand for offshore windfarms

Experimental evaluation of backfill in scour holes around offshore monopoles

An investigation of the use of a bearing plate to enhance the lateral capacity of monopile foundations

Optimizing site investigations and pile design for wind farms using geostatistical methods: A case study

Towards the FE prediction of permanent deformations of offshore wind power plant foundations using a high-cycle accumulation model

Cyclic accumulation effects at foundations for offshore wind turbines

Study on soil-structure interaction of suction caisson by large-scale model tests

8 Jack-up units

Simplified VH equations for foundation punch-through sand into clay

Characterisation of undrained shear strength using statistical methods

Centrifuge modelling of spudcan deep penetration in multi-layered soils

A probabilistic approach to the prediction of spudcan penetration of jack-up units

An assessment of jackup spudcan extraction

3D FE analysis of the installation process of spudcan foundations

Undrained bearing capacity of deeply embedded foundations under general loading

9 Anchoring systems

Trajectory prediction for drag embedment anchors under out of plane loading

Setup following keying of plate anchors assessed through centrifuge tests in kaolin clay

Seismically-induced displacements of a suction caisson in soft clay

SEPLA keying prediction method based on full-scale offshore tests

Set-up of suction piles in deep water Gulf of Guinea clays

Centrifuge testing of suction piles in deep water Nigeria clay – Effect of stiffeners and set-up time

Numerical FEM and laboratory study of the bearing capacity factor Nc for plate anchors

Caisson capacity in clay: VHM resistance envelope – Part 2: VHM envelope equation and design procedures

Installation and in-place assessment of drag anchors in carbonate soil

Caisson capacity in clay: VHM resistance envelope – Part 1: 3D FEM numerical study

Numerical investigation of the behaviour of suction caissons in structured clays

Cyclic moment loading of suction caissons in sand

10 Pipelines and risers

Multidirectional analysis of pipeline-soil interaction in clay

Geotechnical challenges for deep water pipeline design – SAFEBUCK JIP

Large deformation finite element analysis of vertical penetration of pipelines in seabed

Implementation of geotechnical techniques in the analysis of pipeline response

Lateral soil resistance to an untrenched pipeline under the action of ocean currents

Vertical cyclic testing of model steel catenary riser at large scale

Kupe gas project pipeline – optimisation of discrete rock berm design shore approach

Model test studies on soil restraint to pipelines buried in sand

Pipe-soil interaction on clay with a variable shear strength profile

Sweeping behaviour of shallowly-embedded pipeline during cyclic lateral movement

Advanced nonlinear hysteretic seabed model for dynamic fatigue analysis of steel catenary risers

Mobilization distance in uplift resistance modeling of pipelines

Theoretical, numerical and field studies of offshore pipeline sleeper crossings

Observations of pipe-soil response from the first deep water deployment of the SMARTPIPE®

11 Trenching, ploughing, excavation and burial

Influence of object geometry on penetration into the seabed

Investigation into the effect of forecutters on plough performance

State-of-the-art jet trenching analysis in stiff clays

Numerical modelling of soil around offshore pipeline plough shares

Anchor–chain–rock fill–soil interaction: Evolution of design methods

Development of a jet trenching model in sand

12 Design and risk

Structural factors affecting the system capacity of jacket pile foundations

The new API Recommended Practice for Geotechnical Engineering: RP 2GEO

Comparison of ISO 19901-2 and API RP 2A seismic design criteria for a site in the Caspian Sea, Turkmenistan

فیلم آموزشی آزمایش نفوذ مخروط در بستر دریا توسط کشتی /Educational film on the seabed Cone Penetration Test by ship

فیلم آموزشی آزمایش نفوذ مخروط در بستر دریا توسط کشتی

Educational film on the seabed Cone Penetration Test by ship


دستگاه نفوذ مخروطی Cone Penetration Test ( CPT) یکی  از کاراترین دستگاه های آزمایشهای برجا

In situ testing  مطالعات ژئوتکنیک می باشد.

ثبت نتایج بصورت پیوسته در عمق بستر دریا، امکان ثبت فشار آب منفذی بصورت پیوسته، امکان تشخیص لایه های با ضخامت بیشتر از 5 سانتیمتر از خاکهای روانگرا ( لنزهای ماسه ای) تکرار پذیر بودن نتایج آزمایش (Repeatability) استاندارد بودن نحوه انجام آزمایش، کاهش دست خوردگی خاک و سرعت انجام آزمایش، از مهمترین ویژگی های دستگاه CPT می باشد.